recoil

Extend the life of your weapon by installing a Sprinco Recoil Management Guide Rod System. A secondary, or sub-spring assembly is incorporated onto a heat treated, 17-4 H900 stainless steel guide rod to cushion the slide to frame impact! All components, including the chrome silicon wire secondary springs, are hand polished to a brilliant finish for reduced friction.

Our products are used by many of the top competition shooters in the world, including both World and Multi-National Champions. Their reliability is validated by their use by Law Enforcement and Elite U.S. Military Forces around the world in combat deployment.

Sprinco USA Recoil Management Systems make a significant difference by the management of peak impact forces to the slide/frame interface. The graduated sub-spring is engineered and critically positioned in each model to ensure normal cycling and reliability. In most models, the spent case has already been ejected prior to slide deceleration. The reduced slide to frame impact results in reduced energy transfer to the grip, wrist, and other extremities ("less felt recoil"), as well as keeping the gun tighter longer by reducing slide battering. This is a proven effective no frills, no gimmick approach to recoil management.

Installation is as easy as installing your stock guide rod system. No firearm modification is necessary to enjoy significant reductions in muzzle flip and perceived (felt) recoil. Our primary engineering design focus is to enable the flatness slide displacement for faster return to fixed sight or red dot sight picture for rapid fire shot placement. The other attributes of reduced felt recoil and slide battering are complementary when the proper balance is achieved. While you may not be bothered by the recoil of your pistol, expert as well as novice shooters benefit from faster target acquisition and lowered split times.

Some of the benefits of installing a Sprinco Recoil Management System in your firearm:

LIFETIME WARRANTY AGAINST BREAKAGE

Reduces Muzzle Flip
Faster Return to Sight Picture for Follow Up Shots Sight Acquisitioon
Reduces Felt (Perceived) Recoil
Protects Your Firearm from Slide Battering
Legal for Competition in Most IDPA*, USPSA, And CMP Divisions
17-4 H900 Heat TreatedStainless Steel Construction
Chrome Silicon Wire Secondary Springs Never Have To Be Replaced
No Modification to Firearm Required
* Current IDPA SSP Division Rules disallow the use of our Beretta, Glock® Gen 4 and Gen 5 (X), Witness / Tanfoglio, and Sig-Sauer (Except for P2022 Series) Recoil Management Systems
due to required Slide Bushing.

60 DAY MONEY BACK SATISFACTION GUARANTEE

IMPORTANT NOTES FOR 1911 SHOOTERS

Our Recoil Management Systems, when implemented in the 1911 platform, are infinitely tuneable. We will set up your basic system to best meet your indicated use and load range, and you then "fine tune" it with our chrome silicon recoil springs for your personal "feel" / performance / competition preferences.

NOTES FOR PRODUCTION CLASS SHOOTERS

If you are a Competition Shooter competing with Minor PF Loads, please contact us prior to placing your order. We have the ability to set our systems up in advance for Production Class, as well as qualifying IDPA Divisions.

 

FAQ's (Or More Importantly, Questions You SHOULD Consider)

Q: How do I calculate Power Factor (PF)?

A: Power Factor is calculated by multiplying the weight of the projectile times the muzzle velocity of the round divided by 1000. (E.G., 115 Gr. Projectile X 1150 fps / 1000 = 132.29 PF)

Q: What is the meaning of the term "Slide Bushing" used in the Item Descriptions?

A: In the models requiring same, a "slide bushing" is a precision machined component that will be on the guide rod in the packaging when received. It looks like a flat or hat shaped washer. The bushing is to be removed from the rod and dropped into the back of the spring tunnel of the slide. If it is hat shaped, the smaller O.D. will be installed to the muzzle end of the slide. The bushing functions to both mate with the diameter of the guide rod for a precise fit, as well as functioning as an engagement surface for the secondary spring activation.

Q: What is the difference between the standard model and the COR-BON model for my pistol?

A: While the standard model recoil system will function flawlessly using hot ammo, this does not reciprocate. Tame target loads will not always cycle the COR-BON systems, and you may have short stroking issues. Keep in mind that the standard system will noticeably reduce recoil and muzzle flip when using hot ammo, but not as effectively as the COR-BON models as they would in the limited number of actual applications where they are appropriate. In summary, if you are going to be shooting a wide range of power factor loads, order the standard system. If you are shooting hand cannon loads EXCLUSIVELY, go with the COR-BON system.

The COR-BON model utilizes a stronger subspring in order to compensate for hot, +P+ loads. A shooter should only use a COR-BON recoil system if he/she intends to exclusively shoot MAXIMUM POWER FACTOR +P+ ammo. The.40 Super, .45 Super, .400 COR-BON, and full house 10mm loads would also fit into this category. If you are using one of the fine Clark .460 1911 Rowland Conversion packages, special considerations apply, and we have a designated system for use with their conversion package. When in doubt, or even CONSIDERING in minor caliber pistols, PLEASE give us a call first!

Q: I already use, or am considering using an aftermarket compensated or ported barrel in my pistol. Does this change anything in the function of my pistol when using your "Recoil Management Systems?"

A: YES. Using a ported or compensated barrel changes the entire dynamic of designing a compatible and complementary Recoil Management System. We will cheerfully consult and work with you to come up with a design that will function reliably and enhance the performance of your pistol. It could conceivably take more than one experimental attempt to get it right from long distance, but we enjoy the challenge of "long distance engineering!" (We only request that you cover the cost of shipping for additional versions.)

Q: Should I use aftermarket polymer shock buffers in addition to your system?

A: In general circumstances, NO. The use of polymer or nylon shock buffers in any other pistol except for 5" 1911's is absolutely discouraged, as they may cause the slide to "short-stroke" and introduce failures to feed.

While unnecessary due to the use of our secondary spring design used for your individual 1911 platform, it is always imperative to understand that the use of shock buffers in ANY 1911 pistol changes the effective "Solid Height" of the recoil spring, and unless compensated for, will cause the recoil spring to become over stressed and shorten the duty cycle of the spring. Shock buffs may also be denigrated to failure during usage, causing failures to function.



International Orders: We do not accept any individual orders outside the United States or its territories. We ship strictly to United States and U.S. Territory addresses only. Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR). We are unable to ship these items to foreign addresses, including APO/FPO addresses for deployed service members.

Reloading International (Miken, Inc.) (Retail & Commercial) and Brownells (Retail) are Authorized Exporters of Tactical Springs LLC / Sprinco USA products. Please go here for contact information.


View / Edit Your Shopping Cart
Part No. Item Price
5" 1911
11054 1911 & 5" Clones .45 ACP / .40 S&W (Includes Bushing Plug) $94.95
Buy Me
25014 1911 Chrome Silicon Moly Plated Cryogenic Processed Recoil Spring - 14# (Color Coded PURPLE) (This is the "Sweet Spot" Recoil Spring Weight for Use with Shooting 230 Gr. Ball Loads With Our Recoil System) $8.95
Buy Me
11074 1911 & 5" Clones COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Includes Bushing Plug) $99.95
Buy Me
11084 1911 5" Clark .460 Rowland Conversion BBL System (Includes Bushing Plug and Take Down Pinhole) (Used with 20# recoil spring ) (Specify Manufacturer of Pistol When Ordering) $104.95
Buy Me
11254 1911 & 5" Clones Reduced Power Loads (9mm, .38 Super, .45 WAD Loads) (Includes Bushing Plug) [General Purpose Lighter Power Loads][Specify Caliber When Ordering] $94.95
Buy Me
11258 1911 Camp Perry 5" .45 Wad Gun Special Model (Includes Bushing Plug) Re-Engineered Specifically for Bullseye Competition $99.95
Buy Me
11556 1911 "Short" CMP/Tactical for 5" 1911's. (Includes 16# Chrome Silicon Recoil Spring) (Use Factory Spring Plug) (Also for Tactical Shooters who Wish to Retain the Ability to Perform an Easy Press Check.) $89.95
Buy Me
11557 5" 1911 "Short" 5" CMP / Camp Perry Ball Gun (Includes 17# Chrome Silicon Recoil Spring) (Use Factory Spring Plug) Engineered for historical CMP Perry .45 ACP Ball Gun Competition Power Factor Loads Prior To Current Watered Down Rules.) $89.95
Buy Me
11255 Delta Elite & 5" 10mm 1911 Clones (Includes Bushing Plug) (Specify Manufacturer of Pistol When Ordering) $99.95
Buy Me
11259 Delta Elite & 5" 10mm Clones "Short" (Includes 18# Chrome Silicon Recoil Spring) (Use Factory Closed End Spring Plug) (Also for Tactical Shooters who Wish to Retain the Ability to Perform a Press Check) (Specify Manufacturer of Pistol When Ordering) $94.95
Buy Me
12264 STI 5" 1911 .45 /.40 S&W Bushing BBL Models (Includes Bushing Plug) $94.95
Buy Me
12266 STI 5" 1911 Reduced Power Loads (9mm, .38 Super, .45 WAD Loads) (Includes Bushing Plug) [General Purpose Lighter Power Loads][Specify Caliber When Ordering] $94.95
Buy Me
12267 STI 5" 1911 COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) Bushing BBL Models (Includes Bushing Plug) $99.95
Buy Me
12268 STI 5" 1911 10mm Bushing BBL Models (Includes Bushing Plug) $99.95
Buy Me
12249 1911 Replacement Bushing Plug (Fitted for Sprinco Recoil Management Systems) $15.00
Buy Me
IMPORTANT NOTE: Please Specify Manufacturer and Model at Checkout in "Message or Comments" field. If a reverse plug is required, a 2011 model should be used (see below).
Arrow
PLEASE READ THIS!!!
12154 2011 STI / SV 5" Limited / Standard Division .45 ACP / 40 S&W / Tactical Loads (Caspian / STI Type Full Shoulder Reverse Plug Included) $99.95
Buy Me
12254 2011 5" STI / SVI Open Division (Caspian / STI Type Full Shoulder Reverse Plug Included) $99.95
Buy Me
12255 2011 5" STI / SVI 10mm (Caspian / STI Type Full Shoulder Reverse Plug Included) $104.95
Buy Me
12275 2011 5" STI / SVI COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Caspian / STI Type Full Shoulder Reverse Plug Included) $104.95
Buy Me
12250 1911 / 2011 Caspian / STI Type Shouldered Reverse Plug (Fitted for Sprinco Recoil Management Systems) $20.00
Buy Me
IMPORTANT NOTE: SPECIFY IN "MESSAGE OR COMMENTS" FIELD IF YOUR STI PISTOL IS A FACTORY COMPLETED STI Pistol OR IF IT WAS CUSTOM BUILT STARTING FROM AN STI FRAME KIT.
Arrow
PLEASE READ THIS!!!
6" 1911
11064 1911 6" .45 ACP / .40 S&W (Includes Bushing Plug and Hex Wrench) $109.95
Buy Me
11164 1911 6" Reduced Power Loads (9mm, .38 Super, .45 WAD Loads) (Includes Bushing Plug and Hex Wrench)[SPECIFY CALIBER] $109.95
Buy Me
11464 1911 6" 10mm (Includes Bushing Plug and Hex Wrench) $114.95
Buy Me
11264 1911 6" COR-BON (.45 Super, .40 Super, .460 Rowland, .400 Cor-Bon, .45 ACP +P+) (Includes Bushing Plug and Hex Wrench) $114.95
Buy Me
18157 Springfield 6" 1911 .45 ACP / .40 S&W (Includes 6" Springfield Reverse Plug and Hex Wrench) $114.95
Buy Me
18158 Springfield 6" Reduced Power (9mm, .38 Super, .45 WAD Loads) Loads (Includes 6" Springfield Reverse Plug and Hex Wrench) [SPECIFY CALIBER AND IF COMPENSATED BBL OR OPEN / STEEL GUN] $114.95
Buy Me
18159 Springfield 1911 6" COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Includes 6" Springfield Reverse Plug and Hex Wrench) $119.95
Buy Me
18163 Springfield 1911 6" 10mm (Includes Springfield Reverse Plug and Hex Wrench) $119.95
Buy Me
12260 STI 6" 1911 .45 ACP / .40 S&W Longslide (Includes 6" STI Reverse Plug and Hex Wrench) $114.95
Buy Me
12261 STI 6" 1911 Reduced Power (9mm, .38 Super, .45 WAD Loads) (Includes 6" STI Reverse Plug and Hex Wrench)[SPECIFY CALIBER AND IF COMPENSATED BBL OR OPEN / STEEL GUN] $114.95
Buy Me
12263 STI 6" 1911 10mm (Includes 6" STI Reverse Plug and Hex Wrench) $119.95
Buy Me
12262 STI 6" 1911 COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Includes 6" STI Reverse Plug and Hex Wrench) $119.95
Buy Me
10253 1911 Replacement Bushing Plug for 6" Slide (Fitted for Sprinco Recoil Management Systems) $25.00
Buy Me
10254 1911 / 2011 Caspian / STI Type 6" Slide Replacement Full Shouldered Reverse Plug (Fitted for Sprinco Recoil Management Systems) $27.50
Buy Me
10255 Springfield 1911 6" Slide Replacement Reverse Plug (Fitted for Sprinco Recoil Management Systems) $27.50
Buy Me
Beretta
14054 Beretta 92 / M9 (Most Variants Including Brigadier and Elite) (Includes "Slide Bushing" and Chrome Silicon - Moly Plated - Cryogenic Processed 15# Recoil Spring $84.95
Buy Me
14055 Beretta 92A1 / Ninety-Two (Includes "Slide Bushing" and Chrome Silicon - Moly Plated - Cryogenic Processed 15# Recoil Spring) $84.95
Buy Me
14064 Beretta 92 /M9 Camp Perry Ball Gun Special Bullseye Competition Model (Includes "Slide Bushing" + Proprietary Chrome Silicon Recoil and Secondary Springs Specifically Re-Engineered for Atlanta Arms 115 Gr. AMU Match Ammo in the KKM 1:32 Twist BBL) $84.95
Buy Me
14154 Beretta 92 Centurion / Compact Recoil Management System (Includes "Slide Bushing") (Specify Model When Ordering) $84.95
Buy Me
14153 Beretta M9A3 9mm (Includes "Slide Bushing" and Chrome Silicon - Moly Plated - Cryogenic Processed 15# Recoil Spring) $84.95
Buy Me
14254 Beretta 96 (Most .40 & .357 Sig Variants Including Brigadier and Elite) and (Includes "Slide Bushing" & Chrome Silicon - Moly Plated - Cryogenic Processed 15# Recoil Spring) $84.95
Buy Me
14255 Beretta 96A1 / Ninety-Two (.40 & .357 Sig) Recoil Management System (Includes "Slide Bushing" & Chrome Silicon - Moly Plated - Cryogenic Processed 15# Recoil Spring) $84.95
Buy Me
14354 Beretta 96 Centurion / Compact (Includes "Slide Bushing") (Specify Model When Ordering) $84.95
Buy Me
14001 Replacement "Slide Bushing" for Sprinco Beretta Models (Specify Model Number When Ordering) $6.00
Buy Me
Browning
13354 Browning Hi-Power 9mm (Includes Recoil Spring) [Also Compatible with Argentine HP and Charles Daly HP. NOT Compatible with FEG or Arcus Pistols] $104.95
TEMPORARILY
UNAVAILABLE
13454 Browning Hi-Power .40 S&W / .357 Sig (Includes Recoil Spring) [NOT Compatible with old .41 AE Conversion Kits] $104.95
TEMPORARILY
UNAVAILABLE
Canik
IMPORTANT NOTES: The striker spring must be replaced on all Canik pistol variants when firing US manufactured ammunition, especially with 115 gr. target loads or other Minor Power Factor Competition Loads. If you are shooting 115gr., 124 gr., or 135 gr. loads most specimen pistol will run fine down to as close to the 125 PF Minor PF floor as you dare go so as not to DQ using the YELLOW recoil spring. If you are shooting 145 gr., 147 gr., 150 gr., 160 gr, or similar heavy projectiles, the reliable cycle of operations for this pistol design mandates that you keep your PF above 130 using the YELLOW or WHITE recoil springs. Most folks using the heavier projectiles either reload or purchase rounds with PF’s ranging from 131 to 134 and eliminate the head banging problems associated with arguing with the Laws of Physics. If you shoot a wide variety of loads in your Canik pistols, if our standard included recoil spring includes a RED recoil spring, the RED recoil spring is best suited for use when firing 124 gr. NATO, STANDARD or hotter 147 gr. loads, most self-defense loads, or anything else with a Power Factor at or above 140 PF. If you shoot both a combination of higher and lower PF loads, either order a standalone recoil spring other than what we normally include with the listed models to cover all the bases, or if you only shoot loads other than the included “color” recoil spring, simply note in the “Comments” box at Checkout to substitute your desired appropriate recoil spring. In light of the current ammo availability situation, most folks who don’t reload just pick up a standalone spring of the other “color” unless they have a designated purpose for their pistol. *** On an important side note, should you be compelled to install a compensator for either factory or aftermarket threaded barrels, it is highly recommended that you select a minimally efficient micro-comp unless you desire to only fire +P ammunition. When at all possible, “Try Before You Buy” to avoid frustration. The functional design of these great pistols differs from the majority of striker fired pistols and dictates the amount of cyclic energy to be maintained to avoid short stroking or stovepipes with 115 gr or similar light loads. If you attempt to “game” power factor with increasingly lighter and lighter recoil springs, the slide will frequently simply refuse to return and remain securely in battery. That’s not a bad thing, but “Physics is Physics”. Just stay in the right lane for the pistol design and enjoy your shooting experience! ***We made our 29 Newton (6.52#) striker springs to reliably ignite all but random rare batches of uber-hard primers encountered when reloading.
Arrow
PLEASE READ THIS!!!
18898 Canik TP9SFx Performance Kit (Includes Recoil Management System with YELLOW Recoil Spring + 29 Newton Striker Spring) $94.95
Buy Me
18895 Canik TP9SF Elite / TP9 Elite Combat / TP9 Elite Combat Executive Performance Kit (Includes Recoil Management System with RED Recoil Spring + 29 Newton Striker Spring)(Specify Model When Ordering) $94.95
Buy Me
18896 Canik TP9 DA Performance Kit (Includes Recoil Management System with RED Recoil Spring + 29 Newton Striker Spring) $94.95
Buy Me
18897 Canik TP9SF / TP9SA / TP9SFL Performance Kit (Includes Recoil Management System with RED Recoil Spring + 29 Newton Striker Spring) (Specify Model When Ordering) $94.95
Buy Me
18899
NEW
Canik METE SFT Performance Kit (Includes Recoil Management System with YELLOW Recoil Spring + 29 Newton (6.52#) Striker Spring) $94.95
Buy Me
18900
NEW
Canik METE SFX Performance Kit (Includes Recoil Management System with YELLOW Recoil Spring + 29 Newton (6.52#) Striker Spring) $94.95
Buy Me
NOPE
CSC
Canik TP9 SC We do not manufacture Recoil Management Systems or replacement recoil springs for the Subcompact model at this time. The Striker and Trigger Springs below work perform great in the SC Variants. XXX
XXX
18001
NEW
CWIT (Canik / Walther Installation Tool) While not required for installing Recoil Management Systems in Canik or most Walther pistols, this is the perfect handy size assisting tool for making installation faster and effortless. Machined from high density black Delrin® material. $3.50
Buy Me
Canik Trigger Springs & Replacement Recoil Springs
35829 Canik TP & METE Series / Walther PPQ 29 Newton (6.52 Pound) Striker Spring Chrome Silicon, Moly Plated, Cryogenic Processed. (Color Coded ORANGE) $8.95
Buy Me
NEW

87889
Canik TP & METE Series "TSK Competition Trigger Spring Kit" Designed with Daniel Thompson of Team Walther, installation of the 2 springs renders a 3.5# Competition ONLY trigger pull. Includes replacement trigger return spring and firing pin safety spring. Moly Plated and Cryogenic Processed for long service life. Works with factory and aftermarket triggers. $17.95
Buy Me
NEW

87884
Canik TP & METE Series Competition Firing Pin Safety Plunger (Trigger Safety Block) Spring $8.95
Buy Me
87885 Walther / Canik TP & METE Series Competition Trigger Return Spring $8.95
Buy Me
35830 Canik / Walther Standard Power Recoil Spring (Color Coded RED) This is a proprietary spring only for use with Sprinco Recoil Systems shooting 140 or higher Power Factor loads such as 124 gr. NATO, Standard and hotter 147 gr., and most self-defense loads) $8.95
Buy Me
35834 Canik / Walther Reduced Power Recoil Spring (Color Coded YELLOW) This is a proprietary spring only for use with Sprinco Recoil Systems shooting 139 or lower Power Factor loads such as 115 gr. target rounds and other lower power factor competition loads.) $8.95
Buy Me
35833 Canik / Walther WHITE Reduced Power Recoil Spring (Color Coded WHITE) This is a proprietary spring only for use with Sprinco Recoil Systems shooting 139 or lower Power Factor loads such as 115 gr. target rounds and other lower power factor competition loads.) (FULL DISCLOSURE: The WHITE spring is only ONE pound lighter than the YELLOW spring at full Slide retraction. It is not guaranteed to work in all specimen pistols, as it is right on the razor’s edge of functionality due to the basic functional design recoil spring load demands of the platform. This is neither good nor bad, “It’s just Physics”, dictated by the functional demands of cycle of operations for this great pistol design. The YELLOW spring has a longer historical duty cycle than the WHITE spring, and also has a better closed load spring pressure than the WHITE spring. Purchase this spring only if you are adventurous, as we cannot guarantee functionality in your specimen pistol) $8.95
Buy Me
Commander
IMPORTANT NOTE: COMMANDER OWNERS READ THIS BEFORE PLACING ORDER. If your Commander is anything other than a Colt or Springfield, primarily owners of Dan Wesson, Sig, Ruger, Smith & Wesson, Ed Brown, Rock Island Armory, and JJFU pistols, the correct system to order is the "Short Button" model below. If unsure as to which version you need, please give us a call at 800-397-9530 so that we can inform you on how to determine which one you need. Please provide the name of the Manufacturer of your 4.25" / 4.30" BBL Length Commander pistol. when ordering in the "Message or Comments" Field at Checkout. NOT Compatible with Metro Arms pistols.
Arrow
PLEASE READ THIS!!!
11154 Commander & 4 1/4" Clones .45 ACP / .40 S&W (Includes Bushing Plug) $94.95
Buy Me
35716 Commander Chrome Silicon Moly Plated Cryogenic Processed Recoil Spring - 16# (Color Coded RED) Chrome Silicon Moly Plated Cryogenic Processed Recoil Spring (This is the "Sweet Spot" Recoil Spring Weight for Use with Shooting 230 Gr. Ball Loads With Our Recoil System) $8.95
Buy Me
12246 Commander Replacement Bushing Plug (Fitted for Sprinco Recoil Management System) (Also for Sprinco LAR Grizzly Systems.) $15.00
Buy Me
11194 Commander & 4 1/4" Clones 9mm & .38 Super (Includes Bushing Plug) $94.95
Buy Me
11094 Commander & 4 1/4" Clones 10mm (Includes Bushing Plug) $99.95
Buy Me
11174 Commander & 4 1/4" Clones COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) Recoil Management System (Includes Bushing Plug) $99.95
Buy Me
11145 "Short Button" .40 S&W / .45 ACP Commander & 4.25" Clones (Includes Bushing Plug) (See P/N 35716 recoil spring recommendation above.) $94.95
Buy Me
11175 "Short Button" Commander & 4 1/4" Clones COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Includes Bushing Plug) $99.95
Buy Me
11184 "Short Button" 10mm Commander & 4.25" Clones Recoil Management System (Includes Bushing Plug) $99.95
Buy Me
11195 "Short Button" 9mm & .38 Super Commander & 4.25" Clones Recoil Management System (Includes Bushing Plug) $94.95
Buy Me
NOTE: Some Colt Commander & Clones Reverse Plugs Available. CALL
CZ
19054 CZ 75B / 85B (9mm) (Includes Recoil Spring) $84.95
Buy Me
19053 CZ SP-01 / Shadow I (All Calibers) (Includes Recoil Spring and Optional Use "Slide Bushing") $84.95
Buy Me
19052 CZ Shadow II (Includes Recoil Spring and "Slide Bushing") $84.95
Buy Me
19055 CZ 75 B (40 S&W) (Includes Recoil Spring and Optional Use "Slide Bushing") $84.95
Buy Me
19056 CZ-75 Standard IPSC 40 S&W only (Includes "Slide Bushing") (Use with Factory or Buffer Tech Polymer Buffer) (Not available for 9mm models) $84.95
Buy Me
19057 CZ-97 B (.45 ACP) (Includes Recoil Spring & "Slide Bushing") $84.95
Buy Me
19061 CZ P-10 C (Includes Recoil Spring) $84.95
Buy Me
NOTE: Please indicate CALIBER in "Message or Comments" field at Checkout when ordering Glock® systems.
Arrow
PLEASE READ
THIS!!!
Glock® 1st - 3rd Generation
16154 Glock® 17 / 17L / 22 / 24 / 31 (Includes Recoil Spring)(Indicate if for "C" models or using aftermarket ported or compensated BBLs.)[SPECIFY CALIBER] $84.95
Buy Me
16754 Glock® 17 / 17L VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes 17# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $94.95
Buy Me
16155 Glock® 34 / 35 (Includes Recoil Spring) (Advise if you are using aftermarket ported or compensated BBLs.) $84.95
Buy Me
16355 Glock® 34 VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes 17# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $94.95
Buy Me
BABY GLOCK® MODELS RETURNING EVENTUALLY!!! WEBSITE WILL BE UPDATED WHEN AVAILABLE
35613 13# Chrome Silicon Moly Plated Cryogenic Processed Recoil Spring for Competition Shooters for Glock® Models 17/17L/22/24/34/35. (ALL Generations) (Also use for 17C & 22C or With Some Suppressors) $8.95
Buy Me
16254 Glock® 19 / 23 / 32 (Includes Recoil Spring)(Indicate if for "C" models or using aftermarket or compensated BBL.)[Specify Caliber] $84.95
Buy Me
16954 Glock® 19 VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes 18# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $94.95
Buy Me
35193 13# Chrome Silicon Moly Plated Cryogenic Processed Recoil Spring for Competition Shooters for Models 19 & 23 (ALL Generations) (Also use for 19C & 23C or With Suppressor) $8.95
Buy Me
16324 Glock® 20 VERSATILITY KIT (Includes Recoil Spring + 3 Secondary Springs for Experimentation with Your Loads + Loc-Tite for Permanent Assembly) $99.95
Buy Me
16354 Glock® 21 (Includes Recoil Spring) (Indicate if for "C" models or using aftermarket or compensated BBL.) $84.95
Buy Me
16374 Glock® 21 COR-BON (Includes Recoil Spring) (For .45 ACP +P+ Loads Only. NOT currently appropriate for .45 Super or .460 Rowland) $89.95
Buy Me
16176 Glock® 37 (Includes Recoil Spring) (Indicate if for "C" models) $84.95
Buy Me
16276 Glock® 38 (Includes Recoil Spring)(Indicate if for "C" models) $84.95
Buy Me
+++ NOTE: Our GLOCK® GEN 4 and 5 (X) SYSTEMS ARE NOT COMPATIBLE WITH 1st - 3rd GENERATION PISTOLS AND VICE VERSA +++
Glock® Gen 4
16158 Glock® 17 / 22 / 31 Gen 4 Only (Includes Recoil Spring & "Slide Bushing") (Indicate if for "C" models or using aftermarket ported or compensated BBL.)[Specify Caliber] $89.95
Buy Me
16758 Glock® 17 / 17L Gen 4 Only VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes "Slide Bushing" + 17# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $99.95
Buy Me
16258 Glock® 19 / 23 / 32 Gen 4 Only (Includes Recoil Spring & "Slide Bushing") (Indicate if for "C" models or using aftermarket ported or compensated BBL.)[Specify Caliber] $89.95
Buy Me
16958 Glock® 19 Gen 4 VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes "Slide Bushing" + 18# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $99.95
Buy Me
16455 Glock® 34 / 35 Gen 4 Only (Includes Recoil Spring & "Slide Bushing") (Advise if you are using aftermarket ported or compensated barrel) $89.95
Buy Me
16345 Glock® 34 Gen 4 Only VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes "Slide Bushing" + 17# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $99.95
Buy Me
16475 Glock® 35 COR-BON Gen 4 Only (.40 Super & .40 S&W +P+ Exclusively) (Includes Recoil Spring & "Slide Bushing") (Advise if you are using aftermarket ported or compensated BBL.) $94.95
Buy Me
16328 Glock® 20 Gen 4 Only VERSATILITY KIT (Includes "Slide Bushing" + Recoil Spring + 3 Secondary Springs for Experimentation with Your Loads + Loc-Tite for Permanent Assembly) $99.95
Buy Me
16358 Glock® 21 Gen 4 Only (Includes Recoil Spring & "Slide Bushing") (Indicate if for "C" models) $89.95
Buy Me
16379 Glock® 21 Gen 4 Only COR-BON (Includes Recoil Spring & "Slide Bushing") (Indicate if for "C" models) (For .45 ACP +P+ Loads Only. NOT currently appropriate for .45 Super or .460 Rowland) $94.95
Buy Me
16477 Glock® 37 Gen 4 Only (Includes Recoil Spring & "Slide Bushing") (Indicate if for "C" models) $89.95
Buy Me
16478 Glock® 38 Gen 4 Only (Includes Recoil Spring & "Slide Bushing") (Indicate if for "C" models) $89.95
Buy Me
16041 Glock® 40 Gen 4 Only VERSATILITY KIT (Includes "Slide Bushing" + Recoil Spring + 3 Secondary Springs for Experimentation with Your Loads + Loc-Tite for Permanent Assembly) $99.95
Buy Me
16441 Glock® 41 Gen 4 Only (Includes Recoil Spring & "Slide Bushing") (Indicate if for "C" models & specify caliber) $89.95
Buy Me
16741 Glock® 41 Gen 4 Only COR-BON (Includes "Slide Bushing" + Recoil Spring + 3 Secondary Springs for Experimentation with Your Loads + Loc-Tite for Permanent Assembly)(For .45 ACP +P+ Loads Only. NOT currently appropriate for .45 Super or .460 Rowland) $99.95
Buy Me
16001 Replacement "Slide Bushing" for Sprinco Gen 4 & Gen 5 (X) Glock® Recoil Management Systems $10.00
Buy Me
Glock® Gen 5 (X)
16558 Glock® 19 / 45 / 47 Gen 5 (X) VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes "Slide Bushing" + 18# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $99.95
Buy Me
16755 Glock® 17 Gen 5 (X) VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes "Slide Bushing" + 17# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $99.95
Buy Me
16555 Glock® 34 Gen 5 (X) VERSATILITY KIT (BEST VALUE to Match with Full Range of Potential 9mm Loads) (Includes "Slide Bushing" + 17# (RED), 15# (BLUE), and 13# (GREEN) Recoil Springs) $99.95
Buy Me
16001 Replacement "Slide Bushing" for Sprinco Gen 4 & Gen 5 (X) Glock® Recoil Management Systems $10.00
Buy Me
GLOCK® is a federally registered trademark of Glock, Inc. or Glock Ges.m.b.H. Tactical Springs LLC / Sprinco USA is an independent dealer of aftermarket parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock® on this page is merely to advertise the sale of Glock® compatible parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock® products.
Kimber
11055 Kimber (5") (Includes Bushing Plug) $94.95
Buy Me
11058 Kimber (5") Gold Custom Match and Other Models Using Reverse Plug (Includes Kimber Reverse Plug Fitted for Sprinco Rods) $99.95
Buy Me
11075 Kimber (5") COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Includes Bushing Plug) $99.95
Buy Me
11253 Kimber (5") Reduced Power Loads (.45 Wad Loads, 9mm, .38 Super) (Includes Bushing Plug) (General Purpose Lighter Power Loads) [Specify Caliber When Ordering] $94.95
Buy Me
11251 Kimber 5" 10mm (Includes Bushing Plug) $99.95
Buy Me
11354 Kimber Pro Carry .45 ACP (All 4" Models) (Includes Reverse Plug) $94.95
Buy Me
11364 Kimber Pro Carry 9mm / .38 Super (All 4" Models) (Includes Reverse Plug) [Specify Caliber When Ordering] $94.95
Buy Me
11374 Kimber Pro Carry 10mm (All 4" Models) (Includes Reverse Plug) $99.95
Buy Me
LAR
16854 LAR Grizzly (Standard Length Slides w/ 5.4" or 6.5" BBLs) (Includes Bushing Plug) (Back by popular demand!) $99.95
Buy Me
Para-Ordnance
11155 Para Ordnance P-13 (All 4.25") (Includes Bushing Plug) $94.95
Buy Me
11050 Para Ordnance Model P-14, P-16 (All 5") (Includes Bushing Plug) $94.95
Buy Me
11250 Para Ordnance Model P-14, P-16 Reduced Power Loads (.45 Wad Loads, 9mm, .38 Super) (Includes Bushing Plug) $94.95
Buy Me
11070 Para Ordnance P-14, P-16 COR-BON (All 5") (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Includes Bushing Plug) $99.95
Buy Me
11080 Para Ordnance P-18 (All 5" 9mm Models) (Includes Bushing Plug) $94.95
Buy Me
Ruger
18014 Ruger P-85 / P-89 (Early Models w/ Protruding Rod Back Only) $84.95
Buy Me
18114 Ruger P-89 (Later Production Models w/ Flat Rod Back Only) $84.95
Buy Me
18034 Ruger P-90 (Early Models w/ Protruding Rod Back Only) $84.95
Buy Me
18044 Ruger P-90 COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Early Models w/ Protruding Rod Back Only) $89.95
Buy Me
18134 Ruger P-90 (Later Production Models w/ Flat Rod Back Only) $84.95
Buy Me
18144 Ruger P-90 COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Later Production Models w/ Flat Rod Back Only) $89.95
Buy Me
18054 Ruger P-91 (Original Version w/ Protruding Rod Back Only) $84.95
Buy Me
Sig
Note: Sig Sauer models using factory supplied stranded wire recoil springs should use their stock spring. Stranded wire springs work in both compression and torsion resistance, affording an additional dampening of the recoil impulse. It is imperative that you orient the smaller I.D. end of the stranded wire spring to the breech end of the pistol when installing onto either factory or aftermarket guide rods. Replacement Sig Stranded Wire recoil springs are available from Brownells or directly from Sig.
15154 Sig-Sauer P220 American .45 ACP Version (Includes "Slide Bushing") (Not for P220 Carry Compact) (Not for 5" BBL Models) $84.95
Buy Me
15155 Sig-Sauer P220 European 9mm Version (Includes "Slide Bushing") (Please Call To Order) $84.95
Buy Me
15156 Sig-Sauer P220 European .45 ACP Version (Also Browning BDA .45 ACP) (Includes "Slide Bushing") (Please Call To Order) $84.95
Buy Me
15174 Sig-Sauer P220 American COR-BON (.45 Super, .40 Super, .400 Cor-Bon, .45 ACP +P+) (Includes "Slide Bushing") $89.95
Buy Me
15254 Sig-Sauer P225 / P228 / P6 / M11 (Includes "Slide Bushing") (Note if for P6) (Not compatible for use in P225 A-1 Models using flat wire recoil springs) $84.95
Buy Me
15854 Sig-Sauer P226 (Includes "Slide Bushing") (Not for 5" BBL Models) $84.95
Buy Me
15874 Sig-Sauer P226 Recoil COR-BON (For .40 Super or +P+ Loads Exclusively) (Includes "Slide Bushing") $89.95
Buy Me
15158 Sig-Sauer P227 (Includes "Slide Bushing" & Optional Use Recoil Spring) (Not for P227 Carry or SAS Models with 3.9" BBLs.) $84.95
Buy Me
15178 Sig-Sauer P227 COR-BON (Includes "Slide Bushing" & Optional Use Recoil Spring) (Not for P227 Carry or SAS Models with 3.9" BBLs.) $89.95
Buy Me
15354 Sig-Sauer P229 (Includes "Slide Bushing") IMPORTANT NOTE: Over the years, Sig has used two different diameters for the flange on the breech end of the stock guide tube. We have both sizes available, but it is imperative that you measure and provide the diameter of your specimen when ordering. The diameter will either be .460" or .4675". $84.95
Buy Me
15320 Sig-Sauer P320-M17 / P320 Nitron Full Size 9mm (Includes Recoil Spring & "Slide Bushing")  
Available
Soon
15001 Replacement "Slide Bushing" for Sprinco Sig Models Requiring Same (Specify Model When Ordering)(If P229 or P220 European Pistols, Please measure and provide Diameter of the Flange at the Breech End of the Factory Guide Tube to 0.XXX" Tolerances) $7.95
Buy Me
15484 Sig-Sauer 2340 / 2022 .40 / .357 Sig Pro (Includes Recoil Spring) $84.95
Buy Me
15494 Sig-Sauer 2009 / 2022 .9mm Sig Pro (Includes Recoil Spring) $84.95
Buy Me
Smith & Wesson
17209 Smith & Wesson M&P / M&PL / M&P Pro & C.O.R.E. 1.0 & 2.0 9mm (Includes Recoil Spring) $84.95
Buy Me
17240 Smith & Wesson M&P / M&PL / M&P Pro & C.O.R.E. 1.0 & 2.0 .40 S&W / .357 Sig (Includes Recoil Spring) $84.95
Buy Me
35513 13# Tactical Springs LLC Smith & Wesson M&P 1.0 & 2.0 Chrome Silicon Moly Plated Cryogenic Processed Recoil Spring for Competition Shooters or w/ Comp and Some Suppressors $8.95
Buy Me
NOTE: M&P models not currently available for Compact or .45 ACP Models
17354 Smith & Wesson 4" Barrel (All Generations of Older Steel or Alloy Frame Pistols) (Indicate Caliber and Model When Ordering) (Includes "Slide Bushing") $94.95
Buy Me
17454 Smith & Wesson 5" Barrel (All Generations of Older Steel or Alloy Frame Pistols) (Indicate Caliber and Model When Ordering) (Includes "Slide Bushing") $94.95
Buy Me
17554 Smith & Wesson Sigma Model 9F (Includes Recoil Spring) $84.95
Buy Me
17654 Smith & Wesson Sigma Model 40F (Includes Recoil Spring) $84.95
Buy Me
17754 Smith & Wesson Sigma Model SD / 9V / 9VE / C (Includes Recoil Spring) $84.95
Buy Me
17854 Smith & Wesson Sigma Model SD/ 40V / 40VE / C (Includes Recoil Spring) $84.95
Buy Me
17954 Smith & Wesson SW99 9mm (Includes RED Recoil Spring) $84.95
Buy Me
17955 Smith & Wesson SW99 .40 S&W (Includes RED Recoil Spring) $84.95
Buy Me
NOTE: SW99 Systems are for Full Size Models, not for Compact Models.
Springfield
18160 Springfield X-D Tactical (5" BBL) 9mm Recoil Management System (Includes "Slide Bushing")(Note: Please advise in Message / Comments field if you are competing in USPSA Production Class w/ Minor PF loads.) $89.95
Buy Me
18161 Springfield X-D Tactical (5" BBL) .40 S&W / .357 Sig Recoil Management System (Includes "Slide Bushing" & Recoil Spring) $89.95
Buy Me
Taurus
18154 Taurus PT-92 / PT-99 (Includes "Slide Bushing" & Recoil Spring) $84.95
Buy Me
18184 Taurus PT-92 / PT-99 AF,AFS, & AR VARIANTS (Includes "Slide Bushing" & Recoil Spring) $84.95
Buy Me
18254 Taurus PT-92C (Includes "Slide Bushing") (Use Factory or 1# Lighter Recoil Spring) $84.95
Buy Me
18354 Taurus PT-100 / PT-101 (Includes "Slide Bushing" & Recoil Spring) $84.95
Buy Me
18384 Taurus PT-100 / PT-101 AF,AFS, & AR VARIANTS (Includes "Slide Bushing" & Recoil Spring) $84.95
Buy Me
18854 Taurus PT-58 (Includes "Slide Bushing") $84.95
Buy Me
Walther
IMPORTANT NOTES: If you are shooting 115gr., 124 gr., or 135 gr. loads most specimen pistol will run fine down to as close to the 125 PF Minor PF floor so as not to DQ using the YELLOW recoil spring. If you are shooting 145 gr., 147 gr., 150 gr., 160 gr, or similar heavy projectiles, the reliable cycle of operations for this pistol design mandates that you keep your PF above 130 using the YELLOW or WHITE recoil springs. Most folks using the heavier projectiles either reload or purchase rounds with PF’s ranging from 131 to 134 and eliminate the head banging problems associated with arguing with the Laws of Physics. If you shoot a wide variety of loads in your Canik pistols, if our standard included recoil spring includes a RED recoil spring, the RED recoil spring is best suited for use when firing 124 gr. NATO, STANDARD or hotter 147 gr. loads, most self-defense loads, or anything else with a Power Factor at or above 140 PF. If you shoot both a combination of higher and lower PF loads, either order a standalone recoil spring other than what we normally include with the listed models to cover all the bases, or if you only shoot loads other than the included “color” recoil spring, simply note in the “Comments” box at Checkout to substitute your desired appropriate recoil spring. In light of the current ammo availability situation, most folks who don’t reload just pick up a standalone spring of the other “color” unless they have a designated purpose for their pistol. *** On an important side note, should you be compelled to install a compensator for either factory or aftermarket threaded barrels, it is highly recommended that you select a minimally efficient micro-comp unless you desire to only fire +P ammunition. When at all possible, “Try before you buy” to avoid frustration. The functional design of these great pistols differs from the majority of striker fired pistols and dictates the amount of cyclic energy to be maintained to avoid short stroking or stovepipes with 115 gr or similar light loads. If you attempt to “game” power factor with increasingly lighter and lighter recoil springs, the slide will simply refuse to return and remain securely in battery. That’s not a bad thing, but “Physics is Physics”. Just stay in the right lane for the pistol design and enjoy your shooting experience!
19164 Walther P-99 9mm (Includes RED Recoil Spring) $89.95
Buy Me
19165 4" Walther PPQ 9mm (Includes RED Recoil Spring) (Fits 4" M1/M2 Variants) $89.95
Buy Me
19168 5" Walther PPQ M2 9mm (Includes RED Recoil Spring) $89.95
Buy Me
19175
NEW
Walther PPQ M2 9mm Q4 Match STEEL FRAME (Includes YELLOW Recoil Spring for Minor Power Factor Loads up to 139 PF) $89.95
Buy Me
19170 5" Walther PPQ M2 9mm Q5 Match POLYMER FRAME (Includes YELLOW Recoil Spring for Minor Power Factor Loads up to 139 PF) $89.95
Buy Me
19172 5" Walther PPQ M2 9mm Q5 Match STEEL FRAME (Includes YELLOW Reduced Power Recoil Spring for use with Minor Power Factor Loads up to 139 PF)
$89.95
Buy Me
19166 Walther P-99 .40 S&W / .357 SIG (Includes RED Recoil Spring) $89.95
Buy Me
19167 4" Walther PPQ .40 S&W / .357 SIG (Includes RED Recoil Spring) (Fits 4" M1/M2 Variants) $89.95
Buy Me
19173 Walther PPQ M1 / M2 Navy (Includes RED Recoil Spring) (YELLOW Recoil Spring May Be Required for Use With Comp or Suppressor) $89.95
Buy Me
19174 Walther PPQ M2 TAC 4 (Includes RED Recoil Spring) (YELLOW Recoil Spring May Be Required for Use With Comp or Suppressor) $89.95
Buy Me
19168 5" Walther PPQ M2 9mm (Includes RED Recoil Spring) $89.95
Buy Me
19169 5" Walther PPQ M2 .40 S&W / .357 SIG (Includes RED Recoil Spring) $89.95
Buy Me
19176
NEW
Walther 4" PDP Compact 9mm (Includes RED Recoil Spring) $89.95
Buy Me
19177
NEW
Walther 4.5" / 5" PDP 9mm Standard or Compact (Includes RED Recoil Spring + "Slide Bushing" + "CWIT" Installation Tool) $97.95
Buy Me
19002
NEW
Replacement Walther 4.5" / 5" PDP "Slide Bushing" (Creates a precision uniform diameter hole for the guide rod in the polymer factory insert.) $7.50
Buy Me
18001
NEW
CWIT (Canik / Walther Installation Tool) While not required for installing Recoil Management Systems in Canik or most Walther pistols, this is the perfect handy size assisting tool for making installation faster and effortless. Machined from high density black Delrin® material. $3.50
Buy Me
NOPE
WSC
Walther PPQ SC We do not manufacture Recoil Management Systems or replacement recoil springs for the Subcompact model at this time. The Striker and Trigger Springs below work perform great in the SC Variants. XXX
XXX
Walther Trigger Springs & Replacement Recoil Springs
87888 Walther PPQ / P99 / PDP "TSK Competition Trigger Spring Kit" Designed with Daniel Thompson of Team Walther, installation of the 2 springs renders a 3.5# Competition ONLY trigger pull. Includes replacement trigger return spring and firing pin safety spring. Moly Plated and Cryogenic Processed for long service life. Works with factory and aftermarket triggers. $17.95
Buy Me
87886 Walther PPQ / P99 / PDP Competition Firing Pin Safety Plunger (Trigger Safety Block) Spring $8.95
Buy Me
87885 Walther / Canik TP & METE Series Competition Trigger Return Spring $8.95
Buy Me
35829 Canik TP & METE Series / Walther PPQ 29 Newton (6.52 Pound) Striker Spring Chrome Silicon, Moly Plated, Cryogenic Processed. (Color Coded ORANGE) $8.95
Buy Me
35830 Canik / Walther Standard Power Recoil Spring (Color Coded RED) This is a proprietary spring only for use with Sprinco Recoil Systems shooting 140 or higher Power Factor loads such as 124 gr. NATO, Standard and hotter 147 gr., and most self-defense loads) $8.95
Buy Me
35833 Canik / Walther WHITE Reduced Power Recoil Spring (Color Coded WHITE) This is a proprietary spring only for use with Sprinco Recoil Systems shooting 139 or lower Power Factor loads such as 115 gr. target rounds and other lower power factor competition loads.) (FULL DISCLOSURE: The WHITE spring is only ONE pound lighter than the YELLOW spring at full Slide retraction. It is not guaranteed to work in all specimen pistols, as it is right on the razor’s edge of functionality due to the basic functional design recoil spring load demands of the platform. This is neither good nor bad, “It’s just Physics”, dictated by the functional demands of cycle of operations for this great pistol design. The YELLOW spring has a longer historical duty cycle than the WHITE spring, and also has a better closed load spring pressure than the WHITE spring. Purchase this spring only if you are adventurous, as we cannot guarantee functionality in your specimen pistol) $8.95
Buy Me
35834 Canik / Walther Reduced Power Recoil Spring (Color Coded YELLOW) This is a proprietary spring only for use with Sprinco Recoil Systems shooting 139 or lower Power Factor loads such as 115 gr. target rounds and other lower power factor competition loads.) $8.95
Buy Me
NOTE: Walther Systems are for Full Size Models, not for Compact Models.
Witness / Tanfoglio
19154 Witness / Tanfoglio Standard Size (4.5" BBL) 9mm (Includes "Slide Bushing") $84.95
Buy Me
19354 Witness / Tanfoglio Standard Size (4.5" BBL) .38 Super (Includes "Slide Bushing") $84.95
Buy Me
19254 Witness / Tanfoglio Standard Size (4.5" BBL) .40 S&W / .45 ACP (Includes "Slide Bushing") $84.95
Buy Me
19255 Witness / Tanfoglio Standard Size (4.5" BBL) 10mm (Includes "Slide Bushing") $84.95
Buy Me
19354 Witness / Tanfoglio Long Slide (5.25" BBL) 9mm (Includes "Slide Bushing") $84.95
Buy Me
19358 Witness / Tanfoglio Long Slide (5.25" BBL) .38 Super (Includes "Slide Bushing") $84.95
Buy Me
19454 Witness / Tanfoglio Long Slide (5.25" BBL) .40 S&W / .45 ACP (Includes "Slide Bushing") $84.95
Buy Me
19455 Witness / Tanfoglio Long Slide (5.25" BBL) 10mm (Includes "Slide Bushing") $84.95
Buy Me
19554 Witness / Tanfoglio Stock I & II 9mm (Includes "Slide Bushing") $84.95
Buy Me
19558 Witness / Tanfoglio Standard Stock I & II .38 Super (Includes "Slide Bushing") $84.95
Buy Me
19654 Witness / Tanfoglio Stock I & II .40 S&W / .45 ACP (Includes "Slide Bushing") $84.95
Buy Me
19655 Witness / Tanfoglio Stock I & II 10mm (Includes "Slide Bushing") $84.95
Buy Me
19534 Witness / Tanfoglio Stock III 9mm (Includes "Slide Bushing") $84.95
Buy Me
19538 Witness / Tanfoglio Standard Stock III .38 Super (Includes "Slide Bushing") $84.95
Buy Me
19634 Witness / Tanfoglio Stock III .40 S&W / .45 ACP (Includes "Slide Bushing") $84.95
Buy Me
19635 Witness / Tanfoglio Stock III 10mm (Includes "Slide Bushing") $84.95
Buy Me
19754 Tanfoglio Limited Custom, Limited Custom HC. Gold Custom, Eric Custom, V-8 (Includes Spring Plug) $89.95
Buy Me
19755 Tanfoglio V-12 (Eric's Short Gun) (Includes "Slide Bushing") $84.95
Buy Me
19852 Witness / Tanfoglio Elite Match 9mm (Includes "Slide Bushing") $84.95
Buy Me
19858 Witness / Tanfoglio Elite Match .38 Super (Includes "Slide Bushing") $84.95
Buy Me
19853 Witness / Tanfoglio Elite Match .40 / .45 (Includes "Slide Bushing") $84.95
Buy Me
19854 Witness / Tanfoglio Elite Match 10mm (Includes "Slide Bushing") $84.95
Buy Me
19153 Witness / Tanfoglio Compact 10mm [NOTE: Call prior to ordering if you have a recent production polymer frame pistol!] $84.95
Buy Me
14002 Replacement "Slide Bushing" for Sprinco Witness / Tanfoglio Models using same. Specify Model No. When Ordering $6.00
Buy Me
Replacement Recoil Springs are available for all Sprinco Recoil Management Systems that are originally shipped with Recoil Springs. Please call Customer Service for details at 1-800-397-9530.